(c) Dept. of Physics, University of Guelph

The conversion of numbers from one system of units to another often puzzles students, but if it is treated as just another problem in arithmetic using arithmetic's rules the problems disappear.

For example: Knowing that there are 2.54 cm in 1.0 inch, how many cm are there in 15 inches?

Of course the answer is simple

15 in = 15.0 X 2.54 = 38.1 cm

But what actually was being done here? The complete solution is as follows:

Notice that the units were treated just like arithmetic quantities and the "in" were canceled.

Let's do one that is not quite as obvious! How many (mm)2 are there in 4.0 (in)2? The solution is:

Notice that the quantities 2.54 cm/in and 10 mm/cm were used but, because the units had to be squared, then the numbers that accompanied them had also to be squared.

Another example: Convert 30 mi/hr into m/s. This is a common conversion. It is necessary to know that there are 1.6 km in 1 mile and 3600 s in 1 hr (60 X 60).

Notice that the only tricky part here is the time conversion 3600 s/hr which is the wrong way up for our conversion but of course it is equally true that there are (1/3600) hr/s.

So long as the relevant relations between the quantities are assembled in advance, then any conversion can be performed using these strict arithmetic rules.

Try this more complicated conversion:

An old (and ridiculous) unit of thermal conductivity sometimes still encountered in building materials is


where 1 Btu = 1054.8 J

1 in = 2.54 cm

1 ft2 = 0.0929 m2

9 F = 5 C

What is 1 (Btu.hr-1.in.F-1.ft-2) in proper units (W.m-1.C-1)?

Go to answer: